Akzonobel Super Conductive Carbon Black Ketjenblack Ec-300j

• Raw Material: Synthetic Rubber
• Material: Styrene Butadiene Rubber
• Appearance: Powder
• Form: The Massive Raw Rubber
• Transport Package: Kraft Paper Bag
• Specification: 10kg/bag
• Model NO.: EC300J
• Trademark: Ketjenblack
• Origin: Made-in-China
• HS Code: 3802900090
• Production Capacity: 5000mt Per Year

Product Description

Chemical description   Electroconductive carbon black
Black free flowing pellets
Molecular weight : 12
CAS No.: 1333-86-4
EINECS/ELINCS No. : 215-609-9
TSCA status : listed on inventory
Specifications           Pore volume (DBP) : 310-345 ml/100 g
Pore volume (DBP) : 310-345 ml/100 g Fines smaller than 125 micron: 7% w/w max. Grit content : 30 mg/kg max. Moisture: 0.5% w/w max. Volatiles: 1.0% w/w max. Iodine adsorption: 740-840 mg/g Ash: 0.05% w/w max. pH: 8-10 Apparent bulk density: 125-145 kg/m3
Packaging   The standard packaging is 10 kgs net in a vented PE bag. A full pallet carries 400 kgs net. The product is also available in 180 kgs big bags. A full pallet carries 360 kgs net. The packaging meets international regulations.
Storage     It is recommended to store the product in a dry place away from direct sunlight. The packaging can be damaged if exposed to direct sunlight for more than 30 minutes. Please refer to the Material Safety Data Sheet (MSDS) for further information on the safe storage, use and handling of Ketjenblack EC300J. This information should be thoroughly reviewed prior to acceptance of this product. The MSDS is available at www.akzonobel-polymerchemicals.com.
Shelf life    Ketjenblack EC300Jwill remain within its AkzoNobel specification limits at least half a year after delivery, provided it is properly stored.
Application   Ketjenblack EC300J is a very pure carbon black extremely suitable for antistatic and electroconductive applications. Due to its unique morphology and the very high surface area of approx. 800 m2/g (BET), only one third the amount of Ketjenblack EC300J is needed compared to conventional electroconductive blacks in order to achieve the same conductivity. The lower loading of Ketjenblack EC300J allows easier processing for those polymers sensitive to filler addition, thus minimizing loss in mechanical and rheological properties.   Ketjenblack EC-300J when thoroughly dispersed with the polymer significantly increases the conductivity of the resulting compound. Ketjenblack EC-300J can be used in all types of polymers, thermoset, thermoplastic as well as elastomers. Due to its unique morphology and structure with relative low amounts of Ketjenblack EC300J excellent conductive material can be made. The low grit content results in very smooth surfaces during extrusion. The loading needed to obtain a  certain conductivity can vary significantly per type of polymer. More  detailed information is provided in our special Ketjenblack EC Technical  Bulletin. Ketjenblack EC300J has a very low ash content, which makes it the preferred material for semicon applications in cable shielding. Ketjenblack EC300J can also be used to produce conductive coatings and primers. Also here already at very low loading levels optimal electroconductive performance is obtained minimizing loss in mechanical and rheological properties.   Some other applications are batteries, packaging for IC parts, tubing, flooring, carpet backing, automotive parts, cell phones and many more. For even more demanding applications Ketjenblack EC600JD is available of which about half the amount is needed to obtain the same conductivity as with Ketjenblack EC300J.